single cartridge metal housings

water filters > filtration > single cartridge metal housings

The popular ST1, ST2 and ST3 housings have been expanded to a wider range called the ‘FO Range’, with
ST versions being brass head with 304 sump in 3/4". The range now has 1/2", 3/4" and 1" BSP ports as well
as all 316 and 304 BSP ports and an economic cast iron with steel sump version being half the price of ST housings. For lower flow applications where space is an issue a 47/8" is introduced. FO housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge change-out is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.

click picture to view our FO range

RH Range

Differing from the FO range with a simple ring closure threading from the 316 sump to the head, this eliminates
the need for a tie rod, enabling the use of both radial and longitudinal flow cartridges in double and single ended versions. The 1/8" drain in the domed base allows for complete drain down at cartridge change with minimal ground clearance required for cartridge change-out. Standard O-ring is buna. Comes as standard with mounting bracket kit and ring closure tool.

click picture to view our RH range

CSF Range

The CSF range is all 316 stainless steel construction available in 10", 20" and 30" with 3/4" or 1" BSP ports.
These housings accept cartridges with a 222 or 226 SOE cartridge configuration where added seal security is
required, generally sub-micron applications.

Options include: - sanitary fittings, high polish finish for high purity applications, vent and gauge ports. Comes as standard with mounting bracket kit and ring closure tool and 1/4" drain.

click picture to view our CSF range

water filters > filtration > single cartridge metal housings

Site Pages

Site Information