A range of economically priced variable speed cold water booster sets with one or two pump options. The sets feature the Easymat variable speed controller and MXH series, all stainless steel, horizontal, multi-stage centrifugal pumps.
MXH Series all stainless steel, horizontal, multi-stage centrifugal pumps.
Aluminium 2-Pole (2900 rpm) induction motors, three phase, 230/400/3/50, class F insulation, IP54 enclosure.
One piece stainless steel manifolds and pipe-work, stainless steel fittings, nickel plated brass isolating and stainless steel non-return valves, electro-galvanised base plate, GWS PressureWave© accumulator. Fully wired and tested.
Fluid: Clean Cold Water.
Control: Easymat variable speed controller via pressure transducer.
Fluid Temp: Max 25 Deg.C.
Max Press: 10 bar Operation Pressure
Air Amb: Max 40 Deg.C
Rated: Continuous Service
The Easymat is equipped with a control panel for simple system programming and parameter monitoring. The 2 scroll buttons are used to scroll through the different operating parameters the Easymat can display.
At the same time you can use the 2 scroll buttons to move around the set up menu and to change the various options.
The custom LCD display gives a clear overview of the system condition and operating parameters. The icons above and below the display confirm the mode in which the Easymat is working and highlight any problems.
The 4 set-up buttons allow the operator to move between the set-up menus and to start and stop the pump/s. The symbols are designed to make the various function of each button clear. With these 4 buttons and the two scroll buttons you can manage all the set-up and operating parameters without the use of an external controller or computer.