Crystal-Right is the ideal media for well water because it can address multiple issues all at once
Removes manganese and iron
Balances pH levels
This means Crystal-Right can do the job of multiple pieces of equipment. Systems using Crystal-Right media can function like an iron filter, a water softener, and an acid neutralizer. It almost seems too good to be true
but thats what makes Crystal-Right unique.
Mineral-Right produces two types of Crystal-Right:
CR100 High capacity for reducing iron and manganese. Has a lower capacity for reducing hardness. Also, able to balance pH levels of water.
CR200 High capacity for reducing iron and manganese. Has a comparatively higher capacity for reducing hardness from calcium and magnesium.
The potential for using Crystal-Right to treat municipal water is growing. Thats because many cities are disinfecting water with chloramines (chlorine and ammonia). While carbon filtration can reduce chlorine content, it does not filter ammonia. However, when Crystal-Right media and carbon filtration work together, we can remove both chlorine and ammonia from city water.
Yet another benefit of Crystal-Right is that it can be sanitized during the backwash cycle of regeneration using chlorine. Chlorine will not damage the media. This allows us to use our patented Chlorine Generator along with Crystal-Right units.
Removes at the same time iron, manganese and hardness by ion exchange
Removes manganese, difficult to remove by classic oxidation
Absorption of NH3
Increases the pH (absorption H+)
Excellent filtration of non-dissolved particles
A regeneration needs 30% less NaCl than when using classic softeners resins
Chlorine has no negative impact on Crystal Right and is stronly advised when regenerating to counterattack the proliferation of bacteries.
No specific requirements for pumps as the backwash flow is lower than the service flow
Delivered in convenient bags of 22,7kg (28,3L)
When used appropriately, Crystal Right has a lifetime of 10 year
Crystal right is used for the treatment of non-oxidized iron and manganese (water originating from wells and boreholes.)
CR 100: minimal hardness (50mg/L); TDS > 80 mg/L; pH between 5.7 - 14.
Maximum content of iron- and manganese:15 mg / L
CR 200: minimal hardness (50mg/L); TDS > 80 mg/L; pH between 7 - 14.
Maximum content of iron- and manganese:15 mg/L
Capacity CR100: 30g/L resin; CR200: 40g/L resin.
For the removal of NH3, CR100 is to be used.
Crystal Right cannot be rinced with classic resin cleaners, CR Clear Out is to be used.
Aluminium should not be present in water
30% -50% freeboard
Density: 1.2 Kg/litre