Product Description
Model Alpha 240
Flow 400 LPH @ 20°C l/hr
Efficiency 50%
Typical mineral reduction 97 to 98%
Membranes 2 x 4040
Feed Water Pressure 2 - 5 bar
Feed Water pH Range 6 - 8
Feed Water Temperature 10°C - 30°C
Iron Tolerance 0.05 ppm
Inlet/outlet/drain ¾, ½, ½
Electricity 230v sngle phase
Water quality Requires softened water supply , less than 1000 mg/l TDS raw water mineral content.
Conductivity probe and alarms, level switch, pressure switch and alarms all included
Features
Membrane vessels FRP or Stainless Steel
TFC Spiral wound membranes 2,5" or 4" diameter
SS304 stainless steel vertical centrifuge high pressure pump (available in between ALFA 340 - ALFA 1540)
Brass body rotary type high pressure pump (available between ALFA 140 - ALFA 240)
Equipments between ALFA 140 and ALFA 640 has SS304 stainless steel frame (optional ST37 carbon steel)
5 micron cartridge filter
Low and high pressure pipings U-PVC
Solenoid automatic valves or equivalent valve
Pressure adjustment valves in pump outlet and waste water line
Low and high pressure switches
Permeate and concentrate flowmeters (rotameters)
Recirculation flowmeters (reverse cycle is available in between ALFA 340 - ALFA1540)
Glycerine Filled Pressure Gauges
Product Water Conductivity Meter
Autoflush System
RO Electronic Control Card, Alarm and Position Indicators
220 V/50Hz/1ph (between ALFA 140 - ALFA 240)
380 V/50Hz/3ph (between ALFA 340 - ALFA 1540)
Antiscalant dosage system is not included
Hydrogen Sulfide should be removed.
Turbidity should be removed (NTU < 1)
Oil-Grase should be removed
SDI < 1
Microbiological contamination should be removed