Ecosoft HR-4040 4" x 40" High Rejection RO Membrane Element
The Ecosoft HR-4040 membrane element is a premium high-rejection reverse osmosis solution, engineered to deliver outstanding performance for 4″ commercial RO systems. With up to 11.2 m³/day permeate flow and 99.3% salt rejection, it is ideal for ensuring highly purified water with minimal operational costs.
Key Features
- Excellent Salt Rejection: Stabilized salt rejection rate of up to 99.3%.
- Efficient Operation: High rejection rates even at low operating pressures.
- Versatile Applications: Recommended for commercial systems like car washes, laboratories, and chemical enterprises.
- Wide Compatibility: Handles feed water TDS levels up to 2500 mg/L.
- Durable Design: Manufactured with advanced technology for reliable long-term operation.
Applications
The Ecosoft HR-4040 membrane element is suitable for diverse commercial and industrial water purification tasks, including:
- Car washes
- Laboratories and research facilities
- Chemical and industrial enterprises
- Distilled water preparation
- Glass production
- Household and industrial chemicals manufacturing
Technical Specifications
| Parameter | Specification |
|---|---|
| Permeate Flow Rate* | 11.2 m³/day |
| Minimum Salt Rejection** | 99.0% |
| Stabilized Salt Rejection** | 99.3% |
| Nominal Active Area | 9.3 m² |
| Feed Spacer Thickness | 28 mm |
| Max. Operating Water Temperature | 45°C |
| Max. Operating Pressure | 41.0 bar |
| Max. Pressure Drop | 1.0 bar |
| pH Range (Operational Mode) | 3–10 |
| pH Range (Cleaning Mode) | 2–12 |
| Max. Feed Flow | 3.6 m³/h |
| Max. Feed Silt Density Index (SDI) | SDI 5 |
| Free Chlorine Tolerance | <0.1 ppm |
* Permeate flow for a single element may vary by ±15% from the stated value.
** Based on standard test conditions of 1500 mg/L NaCl, 25°C, 15% permeate yield, and 10.3 bar applied pressure.
Source Water Requirements
- Max. Operating Water Temperature: 45°C
- pH Range (Operational Mode): 3–10
- pH Range (Cleaning Mode): 2–12
- Max. Feed Silt Density Index (SDI): SDI 5
- Free Chlorine Tolerance: <0.1 ppm
Service and Maintenance
To maximize the performance and lifespan of the Ecosoft HR-4040 membrane, follow these maintenance guidelines:
- Ensure proper pretreatment of the membrane before initial use.
- Gradually increase feed water pressure over 30–60 seconds and operating flow over 15–20 seconds to avoid damage from surges.
- Discharge permeate generated during the first hour of operation.
- Keep the membrane wet after initial wetting to avoid damage.
- During long shutdowns, store the membrane in a preservative solution to prevent biofouling.
- Ensure the pressure drop across the housing does not exceed 3.4 bar.
Note: Avoid rapid pressure or flow changes during start-up, cleaning, or shutdown to protect the membrane's integrity.
