16-in-1 Water Quality Test Strips – 50 Pack

16-in-1 Water Quality Test Strips provide a quick and convenient way to carry out basic screening of a wide range of water quality parameters. Each bottle contains 50 test strips, making them suitable for routine checks on drinking water, borehole or spring water, pools and spas, aquariums, hydroponics and other general water testing applications.

Simply dip a strip into the water sample for 1–2 seconds, remove it, hold it horizontally and compare the test pads with the colour chart on the bottle. Results should be read within approximately 60 seconds.

Tests 16 Water Quality Parameters

• pH
• Total alkalinity
• Free chlorine
• Total chlorine
• Nitrate
• Nitrite
• Mercury
• Lead
• Iron
• Copper
• Fluoride
• Bromine
• Chromium
• Total hardness
• Carbonate
• Cyanuric acid

Key Features

• 50 strips per bottle
• Tests 16 parameters from a single strip
• Fast colour-change results, typically read within 60 seconds
• Simple dip-and-compare testing method
• Useful for routine home and general-purpose water checks
• Compact bottle with colour comparison chart

Typical Applications

• Drinking water screening
• Borehole and spring water
• Swimming pools, hot tubs and spas
• Aquariums and aquaculture
• Hydroponics
• General water quality checks and demonstrations

How to Use

1. Collect a representative water sample in a clean container.
2. Immerse the test strip for approximately 1–2 seconds.
3. Remove the strip and hold it horizontally, gently shaking off excess water.
4. Compare the pads with the colour chart in good light and read the results within 60 seconds.

Please note: These strips are intended for quick indicative screening only. Colour-comparison test strips are not a substitute for laboratory analysis and should not be used to certify drinking water safety, demonstrate regulatory compliance or make critical treatment decisions where an accredited laboratory result is required.

Pack contents: 1 bottle containing 50 × 16-in-1 water quality test strips.