Ecosoft Aquapoint XL Duo Replacement Filter Set x 6 – Sediment & Hydrogen Sulphide
Technical Resources
Technical Resources
Ecosoft Aquapoint XL Duo Replacement Filter Set – Sediment & Hydrogen Sulphide
Keep your Ecosoft Aquapoint XL Duo Whole House Water Filter performing at its best with this genuine replacement filter set, specifically configured for homes experiencing sediment and hydrogen sulphide (rotten egg) odours. This replacement pack contains the same cartridge combination recommended by Ecosoft for treating water affected by suspended solids together with hydrogen sulphide, helping to restore fresh-smelling, cleaner water throughout your entire property.
The first-stage 20 micron polypropylene sediment filter (CPV452020ECO) removes sand, silt, rust and other suspended particles, protecting the catalytic carbon cartridge from premature fouling while extending its service life. The second-stage Catalytic Activated Carbon Hydrogen Sulphide Filter (CRVS4520ECO) uses premium Centaur® catalytic activated carbon to significantly reduce hydrogen sulphide, eliminating unpleasant "rotten egg" odours while improving the taste and smell of your water.
Designed for standard 4.5" × 20" Big Blue filter housings, these genuine Ecosoft cartridges install directly into the Aquapoint XL Duo system without modification, making routine maintenance quick and straightforward.
What's Included
-
6 × Ecosoft 20 Micron Melt Blown Polypropylene Sediment Filter (CPV452020ECO)
-
6 × Ecosoft Hydrogen Sulphide Reduction Catalytic Carbon Filter (CRVS4520ECO)
Key Features
-
Genuine Ecosoft replacement cartridge set
-
Designed specifically for the Aquapoint XL Duo Sediment & Hydrogen Sulphide system
-
Removes sand, silt, rust and suspended sediment
-
Reduces hydrogen sulphide ("rotten egg") odours
-
Premium catalytic activated carbon media
-
Improves water taste and odour
-
Protects downstream plumbing and appliances
-
Standard 4.5" × 20" cartridge size
-
Simple DIY cartridge replacement
Ideal For
-
Private borehole water supplies
-
Well water with sulphur odours
-
Homes experiencing "rotten egg" smells from taps
-
Water containing sediment, sand or rust
-
Whole house filtration systems
How the Filter Set Works
Stage 1 – Sediment Filtration
The polypropylene sediment cartridge captures larger particles including sand, silt, clay, rust and pipe debris. Removing these contaminants first protects the catalytic carbon filter, helping maximise its performance and lifespan.
Stage 2 – Hydrogen Sulphide Reduction
The catalytic activated carbon cartridge is specially engineered to adsorb hydrogen sulphide responsible for unpleasant sulphur odours while also improving the overall taste and smell of your water.
Replacement Interval
For optimum performance, cartridges should typically be replaced every 3–6 months, although replacement frequency will vary depending on:
-
Water consumption
-
Sediment loading
-
Hydrogen sulphide concentration
-
Overall water quality
Higher levels of contamination may require more frequent cartridge changes.
Important Performance Information
Unlike many catalytic carbon filters that advertise very high flow rates, the Ecosoft hydrogen sulphide cartridge is designed to maximise contact time between the water and the catalytic carbon media. This longer contact time allows more effective oxidation and adsorption of hydrogen sulphide, delivering superior odour reduction rather than simply prioritising maximum flow.
For the best treatment performance, the hydrogen sulphide cartridge is intended to operate at a recommended service flow of approximately 5 L/min. Exceeding this flow does not damage the filter, but it can reduce contact time and therefore lower odour removal efficiency. This conservative rating reflects Ecosoft's emphasis on treatment performance rather than headline flow figures.
Compatibility
Compatible with:
-
Ecosoft Aquapoint XL Duo Whole House Water Filter – Sediment & Hydrogen Sulphide
-
Standard 4.5" × 20" (Big Blue 20) filter housings
Technical Specifications
| Specification | Value |
|---|---|
| Cartridge Size | 4.5" × 20" |
| Stage 1 | 20 Micron Melt Blown Polypropylene |
| Stage 2 | Catalytic Activated Carbon (Centaur®) |
| Target Contaminants | Sediment, Sand, Silt, Rust, Hydrogen Sulphide |
| Recommended Service Flow | 5 L/min |
| Installation | Whole House Filtration |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.





