Pentair FloPlus Fibredyne Carbon, 0.5 Micron
Technical Resources
Technical Resources
Pentair FloPlus Fibredyne Carbon Filter Cartridge – 0.5 Micron
The Pentair FloPlus Fibredyne Carbon Filter Cartridge combines high-efficiency 0.5 micron particulate filtration with excellent chlorine taste and odour reduction. Using Pentair’s advanced Fibredyne™ technology, the cartridge offers the contaminant-reduction performance of a fine carbon block while maintaining higher flow rates, lower pressure drop and increased dirt-holding capacity.
Unlike conventional carbon blocks, Fibredyne cartridges use fibres coated with powdered activated carbon (PAC). The fibrous structure creates a large filtration surface area and multiple flow paths, helping trap sediment throughout the depth of the cartridge while allowing water to pass with relatively low resistance.
High Efficiency 0.5 Micron Filtration
FloPlus cartridges provide 0.5 micron nominal filtration, making them particularly suitable where very fine particulate removal is required alongside carbon treatment.
The FloPlus range is also NSF/ANSI Standard 53 certified for the reduction of cysts such as Cryptosporidium and Giardia by mechanical filtration.
Key Features & Benefits
-
0.5 micron nominal filtration
-
Fibredyne™ carbon filtration technology
-
Reduces fine sediment and particulate
-
Excellent chlorine taste and odour reduction
-
NSF/ANSI Standard 53 certified for cyst reduction, including Cryptosporidium and Giardia
-
High dirt-holding capacity
-
True depth filtration
-
Higher flow rates than conventional fine carbon block cartridges
-
Low initial pressure drop
-
Bonded powdered activated carbon media
-
Durable polypropylene end caps
-
Santoprene gaskets
-
Suitable for domestic, commercial and food-service water filtration applications
Available Sizes
| Model | Cartridge Size | Micron Rating | Recommended Flow Rate | Chlorine Taste & Odour Capacity |
|---|---|---|---|---|
| FloPlus-10 | 9¾" Standard | 0.5 micron | 3.8 L/min | >37,800 litres |
| FloPlus-20 | 20" Standard | 0.5 micron | 7.6 L/min | >75,700 litres |
| FloPlus-10BB | 9¾" Large Diameter | 0.5 micron | 7.6 L/min | >94,500 litres |
| FloPlus-20BB | 20" Large Diameter | 0.5 micron | 15.2 L/min | >189,000 litres |
Pentair's stated chlorine taste and odour capacities are based on manufacturer testing and can vary according to water quality, flow rate and system operating conditions.
Technical Specifications
Filter Media: Bonded PAC (Powdered Activated Carbon)
Micron Rating: 0.5 micron nominal
End Caps: Polypropylene
Netting: Polyethylene
Gaskets: Santoprene
Temperature Rating: 4.4–82.2°C
Typical Applications
The Pentair FloPlus 0.5 Micron Fibredyne cartridge is an excellent choice for drinking water and general water filtration systems where both fine sediment removal and activated carbon treatment are required.
It is particularly useful where a standard fine carbon block could suffer from excessive pressure loss or premature blockage.
For water supplies where microbiological contamination may be present, appropriate disinfection should be installed before or after the filtration system as required. The cartridge should not be used on microbiologically unsafe water without adequate disinfection.
Why Choose Pentair FloPlus Fibredyne?
FloPlus offers a useful combination of 0.5 micron filtration, cyst reduction, chlorine reduction and high dirt-holding capacity in a single cartridge.
Its Fibredyne construction provides considerably more flow paths than a conventional dense carbon block, helping maintain good water flow while still providing very fine filtration.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



