Product Description
Application
This Easy Connect valve is an all-in-one connection system to simplify the hydraulic installation of the softener for industrial, commercial and domestic applications. The nominal operating pressure is PN 10 bar and the maximum permissible water temperature is 90 ° C. When the shutoff valves are open, the untreated water enters the Easy Connect via the inlet connection and flows to the softener line. It comes out of the unit via the water softener outlet line and when the shutoff valve is open it goes through the connection in the service water pipe. The bypass valve in the middle remains closed.
Mixed
The Easy Connect block is used with an incorporated mixing needle, this needle is used to mix raw water with treated water to the desired hardness for a constant flow. The system must first be put into normal flow operating conditions. The bypass function of the Easy Connect must remain closed when the system is in service.
Option: Proportional mixing with differential pressure (on 1.5 '' model)
During an increase in the water withdrawal, a loss of pressure at the outlet of the softening system increases, generating a pressure difference which acts on the proportional system. The stiffness of the spring allows the piston to close or open depending on this pressure differential. A greater or lesser amount of untreated water will mix with fresh water (depending on the selected setting). The set screw is turned counterclockwise to limit the raw water mixture. After finding the correct adjustment, the adjusting screw must be fixed with the locknut.
Advantages
Automatic bypass mixing set DN 25/32/40/50
With mixing valve via a needle
With differential pressure compensation valve on the DN40
Compact system all in one Easy installation
Reduced installation time of your installation
Reduction of the number of sticking and therefore of leakage